lrazer
1/2 ton status
is there any difference between the 1 ton and 3/4 ton 14bff besides the spring pearch width
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
14ff ?
- Thread starter lrazer
- Start date
badfish4tail
1/2 ton status
is this the 1ton shock mounts?
SUPER'BURB
1/2 ton status
I don't know if that is or not.
But Mine was a 3/4 ton and this was my shock mount....
But Mine was a 3/4 ton and this was my shock mount....
here is mine.....I have mounts on it... one shock in front and one in back of axle...
bigger pic...http://www.supermotors.org/getfile/193861/original/high_lift_rear2.jpg
badfish4tail
1/2 ton status
I have two of these studs on each side, but i am only running one shock on each side
SUPER'BURB
1/2 ton status
badfish4tail said:
Alright we get it...... your mounts are better than ours, sheesh!
That looks like some custom work. I think the difference is that 1 ton units have the shocks mounted inside the frame instead of outside.badfish4tail said:
Edit: ... but they still use the factory type lower mount.
Someone who knows for sure will chime in...
badfish4tail
1/2 ton status
SUPER'BURB said:Alright we get it...... your mounts are better than ours, sheesh!
Just wanted to know if it is a 1ton thats all
badfish4tail
1/2 ton status
That's what i was thinking, thanksdivorced said:
JIMs70K25
1/2 ton status
I think the drums are bigger also.
dave_90_blazer
1/2 ton status
the 1 ton shock were/re insid the frasme, and both on the same side(front or back, can't remember), 1/2 and 3/4 are on the outside of the frame, and staggered(1 in front, one in back)
lrazer
1/2 ton status
1 ton was staggered as well at least the 84 that i have was plus shock mounts wasn't really what i was wondering about, those and perches can be easily moved
