randycurran
Registered Member
I have a set of 39" Iroks and I need 17" w/ 8x6.5 bolt spacing. rims. I can get 17 x 9 but TSL says they should be at least 10" wide. Would 9" be OK? I only want cheap steel wheels, cause I'm a cheap bastard. 
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
17" rim help!
- Thread starter randycurran
- Start date
They are fine. Preferred imo.
randycurran
Registered Member
Yeah! What back spacing should I run? It's a '88 3/4 ton Suburban.
most run 3.5" to 4"
find some H2s
The 39" Iroks are only 13.5" wide. As stated above a 9" wide wheel is plenty wide enough and I would also prefer that over a 10" wide wheel. Myself and a few others in our club have ran 15.5" wide TSL's on 8" wide wheels for years off-road with good luck as they hold the bead better. I ran 38x13 TSL's on a 10" wide wheels for a few years and it blew beads all the time.
There is a place on line that sells 4 wheel parts, Lots of wheels that size at $~100 a pop. That’s cheap eh. 3and1free. Was just looking at em.
