Sold 1989 K5 blazer SOLD!!!!!!!!!

[hammermachine]

Hi,
I have my 1989 K5 4" lift, Lockright Front 10b limited slip R 10B, Superwinch hubs on AT 35's, DIY 4x4 rear shackles up for sale. I will post this here and on Craig's List because it has to go and the first person who wants it gets it. I have attached a thread on the work I put into her so you can make a informed offer. She has sat for the last six months, but starts and drives with no issues. The engine was rebuilt in 2013, and the tailpan was replaced in 2013 also. I replaced the rubber gasket for the roof in 2013 and patched most of the floors. Please check out the link for more info.

Asking CK5 members $1500 or best reasonable offer. CL price will be much higher.

https://ck5.com/forums/threads/hammers-k5-rebirth.307118/#post-3276118

 

[hammermachine]

 

[hammermachine]

 

[hammermachine]

http://newjersey.craigslist.org/cto/5252585742.html

 

[hammermachine]

 

[hammermachine]

 

[hammermachine]

 

[rcpd34]

I read your thread; you put a sh!t ton of work into this truck. Where are you now with it? What does it still need? Is the rust work all done? I see the dents.

 

[hammermachine]

I read your thread; you put a sh!t ton of work into this truck. Where are you now with it? What does it still need? Is the rust work all done? I see the dents.

I've had this truck a long time; it's been therapy for me the last three or four years. I think it's about 70% done depending what you want in a K5. When I first got it I wanted to do nothing but off road her. All the dents were from my last outing four years ago; the lead on that ride liked heavily treed mountainsides. After that I didn't want to do that kind of off roading again and wanted to restore her (dents and all). I work on her constantly through 2013, when I was unemployed. Now I wanted something a little more family friendly. I think if someone is looking for a good project truck the K5 is perfect or if someone wants to run her until she drops, she's also a great choice. The major rust repair (the tailpan) is complete, all new steel, several layers of paint and sprayed last year with marine wax. I will never do that type of repair again, I'm 1-1 so I'm done.

 

[hammermachine]

No takers? I've had more inquires on CL than CK5? What's up with that?

 

[chevyfumes]

No money no plane ticket no gas.

 

[swettysblazer]

If I wasnt balls deep in a Trazer swap I'd be all over it. This is the twin to what was my truck....

 

[hammermachine]

No money no plane ticket no gas.

I hear you.

 

[hammermachine]

I found some old build threads on my K5

https://ck5.com/forums/threads/project-hammer.248894/

https://ck5.com/forums/threads/broken-body-mounts.258694/#post-2575768

 

[hammermachine]

Also with free parts... not that they are needed, but they're free (with purchase of the truck)

 

[ryoken]

sorry I can't help ya out with this... but I'm beyond overextended at this point....

bump, for a good deal....

 

[jekquistk5]

if you still have it next month I would consider it.

 

[swettysblazer]

if you still have it next month I would consider it.

I'll drive it out for you

 

[hammermachine]

Thanks guys. I don't want to let her go (some serious history) with her. BUT I can't swing three vehicles.

 

[hammermachine]

There has been a fair amount of interest in my K5. So far no winners, a couple of no shows, and a few appointments for next week. We'll see who gets her.