1990 Full Size Jimmy Fender Trimming?

[Hoot]

I have a 6" lift running 35x12.5R16.5 tires, rims are weld racing super single II's with a 16.5x9.75 wheel size. I got fender damage last night when i was wheelin' (pissed). It is evident that i need to do some trimming. who does this kind of work that is of the highest quality? Im running m1008 CUCV axles detriot locker front and rear with 35" tires.

 

[sope]

Here's a link.
http://www.coloradok5.com/fendertrim.shtml

I shaped mine with tape, cut it with an air cut off wheel and spot welded the outer fender to the ineer. Nothing fancy but looks fine. The pic is a silimar set up as you. 4" suspention, 2 " body and 35's. I now run 38 /12.5's and they fit and don't rub either. I should add that I'm another inch up with 38's. The pic is with 10 bolts. The 60 and 1 " longer scackle puts me up to 7 inches. I'm thinking I could fit 40's without cutting more.

 

[Hoot]

i want it professionally done where it looks very nice and looks like it was supposed to be that way out of the factory. pls understand, this truck has never had body damage in the 18 yrs i have owned it and has only 35K miles on it. this looks good, but i dont know if its a trimming kit? http://www.amazon.com/Blazer-Suburban-Xenon-Fender-Flares/dp/B000S96K4S

 

[sope]

Bushwacker makes cut out flares. If you want it to be perfect, having it perfessionaly done by a body man would look best in my opinion. If your wheels are still under the body flares can look silly.

 

[Hoot]

Bushwacker makes cut out flares. If you want it to be perfect, having it perfessionaly done by a body man would look best in my opinion. If your wheels are still under the body flares can look silly.

no, wheels stick out about an inch on each side of the front.

 

[sope]

There you go. That'll work.
http://www.bushwacker.com/search_fender.asp

 

[Hoot]

There you go. That'll work.
http://www.bushwacker.com/search_fender.asp

So i guess i would select shortbox style, maybe with 1-2 inch cut-out... do i then have a body shop do it?

 

[Hoot]

Anybody know where a good shop in las vegas, nv would be to do this kind of work? i dont want to do a sloppy job.