1993 c1500 Proportioning valve

[marsk5]

Today I picked up a 93 c1500 short bed for dirt cheap. It has a 4.3 auto and is in decent shape for being in the Midwest. But the problem with the truck is that the PO had to replace a brake at the Proportioning valve and stripped the threads, I've been searching all night for a new one and it seems that it has been discontinued. I haven't called any junkyards yet due to its Sunday but I don't like to cheap out on brakes so if anyone knows a interchangeable part it would help me out a lot. Thanks for any input

 

[Stomis]

If all else fails you could just run n adjustable after market for the rear and a t for the front.

 

[sweetk30]

If all else fails you could just run n adjustable after market for the rear and a t for the front.

x2

tee fitting at local parts stores for front .

wilwood adjustable for rear for under 50 bucks @ summit racing.

summit brand http://www.summitracing.com/parts/sum-g3905/overview/

wilwood brand http://www.summitracing.com/parts/wil-260-8419/overview/

 

[marsk5]

Thanks for the help I'm going to look into that

 

[marsk5]

It turns out the prop valve isn't bad. There is a comb. Valve right next to prop valve that is stripped out idk what it is exactly. I was wondering what it was and if I can bypass it??

 

[sweetk30]

take pic and post up .

 

[Stomis]

The line block that is nothing more than rear in rear out and front in left front our right front out?