mr_blasto
1/2 ton status
I just realized we don't have any stickies on this forum. This struck me as odd because the 1st gen's are a peculiar bunch.
We could have all kinds of stuff, so here are some ideas:
1. A list of 1st gen specific products from CK5 vendors. This would be a quick and easy way of seeing what is available to us. Also, it might get a bit more attention from vendors so they could start making stuff for us that isn't being offered elsewhere (I was just on Kurt's site and he has a few things. I know Stephen has a few too.).
2. A 1st gen FAQ. This could include stuff like double wall vs. single wall tops, an overview of why putting a 1st gen body on a 2nd gen frame is tough, 1st gen soft top info, a general "don't bite off more than you can chew" blip for first timers, etc.
3. Link to write-ups on the most common or most requested mods (especially if they have 1st gen twists). Things like 56" rear springs, 52" front springs, custom dashes/gauge clusters, fitting a BBC, etc.
4. References to specific pic threads. Topless 1st gen's with rollcages, 1st gen front and rear bumpers, 1st gen specific x" lift and xx" tires, 1st gen fender trimming, sliders, etc.
I realize some of these ideas are better than others, but what do you guys think? What would you like to see stickied? Seems it would really help guys who are just getting exposed to these cool trucks (as well as me). Would this be helpful or a giant waste of time?
Just throwing this out there. If you don't like it, send it back.
We could have all kinds of stuff, so here are some ideas:
1. A list of 1st gen specific products from CK5 vendors. This would be a quick and easy way of seeing what is available to us. Also, it might get a bit more attention from vendors so they could start making stuff for us that isn't being offered elsewhere (I was just on Kurt's site and he has a few things. I know Stephen has a few too.).
2. A 1st gen FAQ. This could include stuff like double wall vs. single wall tops, an overview of why putting a 1st gen body on a 2nd gen frame is tough, 1st gen soft top info, a general "don't bite off more than you can chew" blip for first timers, etc.
3. Link to write-ups on the most common or most requested mods (especially if they have 1st gen twists). Things like 56" rear springs, 52" front springs, custom dashes/gauge clusters, fitting a BBC, etc.
4. References to specific pic threads. Topless 1st gen's with rollcages, 1st gen front and rear bumpers, 1st gen specific x" lift and xx" tires, 1st gen fender trimming, sliders, etc.
I realize some of these ideas are better than others, but what do you guys think? What would you like to see stickied? Seems it would really help guys who are just getting exposed to these cool trucks (as well as me). Would this be helpful or a giant waste of time?
Just throwing this out there. If you don't like it, send it back.


