1ton flip kit or 1ton front hangers for rear springs ( found what i needed )

[sweetk30]

i am thinking of doing a flip kit or homebrew flip. but i need these for a 1ton truck tho. let me know what ya got thanks.

STILL NEED NO ONE HAS COME THREW YET

well after no parts for reasons beond my control i have decided to use the flip kit off 1 truck and drop it to stock for now. as i dont need 2 up in the air that tall.

so problem solved for now.

 

[BIGCHEVYTRUCKDRIVER]

The front spring mount on the rear springs is the same on 1 ton-1/2 ton and works great for home built flip kit just did mine.

 

[b454rat]

The front hangers are NOT the same. The 1 tons are 1" narrower than the 1/2 and 3/4 tons. But I guess it could work if nothing else is available.

 

[sweetk30]

wont work i had a set of super nice 1/2 tons 1time i tried to use on another build. it puts the springs in to a bad bind if you can even hook them up. that 1" width makes a huge diffrence.

this is why i asked for 1ton frame stuff. thanks tho.

 

[b454rat]

I got a 2wd crew cab dually that I'll be tearing apart, if your not in a huge rush you can have these...

 

[sweetk30]

to the top still looking.

 

[1967k10]

I've got some I can pull off. Tell me what ya think they are wprth and I'll work something out with you.

 

[sweetk30]

got pics of them ?

 

[1967k10]

Clean CUCV's hangers. I can go take some pic's but don't have any.

got pics of them ?

 

[sweetk30]

pm sent to you.

 

[sweetk30]

still need them asap no one has come threw on there offers yet.

 

[1967k10]

I apologize but my putting my pulling truck together is priority and it has taken twice the time is should have . There's only so many hours in a day that I can work. If you don't get any this weekend I'll be free after Sunday to cut them off.

Sorry about the delayed responce .

still need them asap no one has come threw on there offers yet.

 

[sweetk30]

info is info. thats all i need for minimum happyness. thanks. will figure it out soon.

i think i am going to drop the 4" lift from my 79k30 and go back to stock lift mabye +1" to keep me happy. need less hight for plowing mostly anyways. and if i do this i have a 4" flip i can reuse from the 1ton frame.

good thing i have saved my stock brackets.