CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

208 fluid capacity

k5ryder

1/2 ton status
Joined
Jun 23, 2013
Posts
232
Reaction score
0
Location
Dickinson,TX
The guy at Orielly said my transfer case only took 2.5qt of fluid so that's what I put in there. Is that correct. I pulled my driveshaft out after test driving it and no fluid came out of the tails shot housing. It has me thinking there isn't rough fluid in the t case.
 
I've always filled mine till it came out of the upper plug hole. It's got a breather to puke out of if it's too much :dunno:
 
Just keep adding until it starts comming out the fill hole. Then get that nut in there quick. That's what I do.
 
Filling the t-case until the fluid comes out is what I've always done on all my other 4x4s but I was trying to go by what I was told
 
Pretty sure filling till it starts coming out is the official method, same as diffs.
 

Latest Posts

Top Bottom