Gravel Maker
1/2 ton status
These are not presently available...
Last edited:
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
....
- Thread starter Gravel Maker
- Start date
81jimmyslt
1/2 ton status
Finally!
rufusbooth
1/2 ton status
SWEET! will these accept the Cadillac Eldo calipers for E-brakes?
Cheers,
Rufus
Cheers,
Rufus
Gravel Maker
1/2 ton status
dominic
1/2 ton status
so all you need is them brackets and some original front calipers(or eldo calipers)and bolt it all together?
Gravel Maker
1/2 ton status
Yes....
The early ElDorado calipers and the 1/2 ton 4x4 rotors and good to go providing your brakelines are up to it.
The early ElDorado calipers and the 1/2 ton 4x4 rotors and good to go providing your brakelines are up to it.
kauzenkaos
1/2 ton status
ummm why arent these listed on the website? i want some so let me know how to get em please.These have been a long time coming but were well worth the wait! They fit perfectly and use basic store bought rotors too, not some special high dollar rotor!
These are just like all of our other Disc Brackets and only $50 a pair!
Gravel Maker
1/2 ton status
The most recent batch...
Was missbent so i took them off the site til we get the new back in stock, should be about 2 weeks...
Was missbent so i took them off the site til we get the new back in stock, should be about 2 weeks...
crash81
1/2 ton status
do you have these brackets ready? and what about brake lines?
Massacre-77
1/2 ton status
i want a set... what all do i need to do the swap thanks.....
kauzenkaos
1/2 ton status
1st thing you need is some adapter brackets. wish i could tell ya where to get some
Massacre-77
1/2 ton status
any updates???
kauzenkaos
1/2 ton status
ok so its been a little over a month and still not on the site whats the deal? how about a discount for those of us who have been waiting impatiently
spastik monkey
Registered Member
will these fit a 10 bolt too?
Cornfield creations
1/2 ton status
Did you get the new ones in yet?
royjones
Trucker upper
T t t
To the top for updates
To the top for updates
Massacre-77
1/2 ton status
bump
I ended up buying the kit from Black Widow Performance [when they were still around]
Instead of a bend he used a seperate spacer because of slight differences between axles, 1/4 to 3/8 different.
All and all, the kit works great.
Instead of a bend he used a seperate spacer because of slight differences between axles, 1/4 to 3/8 different.
All and all, the kit works great.
