I just picked up a 203,doubler,205. 203 has a 27 spline input. 1 st, what output from a th350 can I use/need? Any stock app or is there a aftermarket avail??? 2nd the 205 has a small yoke any suggestions on a larger one?, 3rd it has the ORD twin stick, 203/205, is the ORD 3rd add on the right one for a front/rear addition or do I need the whole new triple stick, thx....Jeff
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
27 spline input
- Thread starter CaSub
- Start date
#1 = the 3/4 stick out input from any th350 that had 203 /or 205 on it.
#2 = easy to fix. just order the yoke size you want. if its for the rear yoke. if the front then need to pop off and count the splines to get correct part. if 10 spline now is the time to upgrade to 30 or 32 ford shaft.
#3 = yes there is a kit.
just call for the parts as thay are so bissy thay havent had time to respond to the site these past few weeks. hope this helped you. good luck.
#2 = easy to fix. just order the yoke size you want. if its for the rear yoke. if the front then need to pop off and count the splines to get correct part. if 10 spline now is the time to upgrade to 30 or 32 ford shaft.
#3 = yes there is a kit.
just call for the parts as thay are so bissy thay havent had time to respond to the site these past few weeks. hope this helped you. good luck.
