78 k5
1/2 ton status
Anyone know what threads is on the pitman arm nut on a 2wd steering box? Mine didn't come with one and I need to pick one up at the local shop but the box is already on the truck and I don't wanna take it off 
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
2wd Box threads
- Thread starter 78 k5
- Start date
I got one fer ya... they are thin... when I went through inspection I failed because my "NUT" was loose.. 
got home and took it off ... was stripped...
looked around and guess what fit!!!!!
my old d60 front pinion nut
was thicker to get more threads on and could crank the living crappola outta it
got home and took it off ... was stripped...
looked around and guess what fit!!!!!
my old d60 front pinion nut
was thicker to get more threads on and could crank the living crappola outta it
It's 7/8" x 14 tpi. I got mine at the GM dealership because I couldn't find one anywhere else, including several fastener supply places.
Rene
Rene
thedrip
1/2 ton status
I bought mine at the local Ace hardware, they had a grade 8 nut, and a grade 8 locking washer in stock (I know, technically speaking there is no allowance for locking washers in the grade 8 standard, but its only holding on a pitman arm)
78 k5
1/2 ton status
thanx
