What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

3/4 front and rearDIFFS 4:10 or higher near N.C.

G

gmcjimmy88

1/2 ton status
Joined
Feb 10, 2005
Posts
559
Reaction score
2
Location
Fayetteville North Carolina
Looking for something to upgrade my current 10 bolts. Would love to get ahold of a late model 3/4 truck and get the diffs and trans/t-case out of. Not happy with the 700r4 and the 10 bolts. They will be going into an 88 Gmc Jimmy running 37 inch MTR's and 7 inches of lift. Lift and tires are on but have only put 40 miles on it since I pulled it out of the garage in Sept. Oh the tranny went out of it on that trip to the trails. Thanks for any help you can provide.
 
got a 14sf from a suburban (8 lug) and a new set of 4.56's (not installed if that helps you - and I'm in Sanford, NC - sell it all for 250.00
 
Got a complete eaton rear with 410s for 100$. In j'ville.
 
BTT Still looking for something to put under my truck. Have cash just no axles. Had a set but couldn't get to them in time. Help me out here someone has to have something that they dont need as much as the cash I have waiting to buy it LOL.
 
I am not in NC but I have what you are looking for. I have a dana 44 front w/ 4.10's ($200) and a 14 bolt w/ full floating axles w/ 4.10's ($300) in Trenton,NJ. probably too far for you but I figured I'd tell ya anyway.
 
I just sold it .Sorry I can't help you out. I will have another set of 3/4 ton axles in a couple of weeks.Same set upm out of an 87 P/U.
 
I have a set. D44HD 4.10 open flat top knuckle, lockouts, Dana 60 HD rear, 4.10 open, have a Tracklok that goes with it, might need pinion bearings, little sloppy. The front will bolt in, the rear will need spring pads, diff width. $250/both plus shipping. Not gonna use them, want them gone. Go to my pics link, then go to axles, IIRC. If not there, go to the suburban album, they are in there.
 
Thanks, New York is a little far though I think. Shipping would kill me probally. I am still in need of some 1 ton axles. Found a set but they were sold before I could get further info on them. Thats the second time I did not make it not so this time The third time is the one right. Let me know what else everyone has and hopefully it will work this time around.
 
Actually shipping isn't that bad, not for $250 for 2 axles. I was gonna ship 2 Dana 60s to GA and it was $277 dollars. While these aren't light axles, they aren't as heavy as 2 60s are. Might have the front sold tho. But I can get you just about any axle you want/need. Just thought I would let you know.....
 
You must log in or register to reply here.

Latest Posts

Top Bottom