3/4 ton 10bolt splindle

[nerraw117]

does anyone have a 3/4 ton front 10 bolt spindle that is in pretty good condition? please someone help me out on this i want my truck to run again.

-steve

 

[kennyw]

I've got a couple spares in good shape. FYI they are the same on 1/2 and 3/4 ton 4x4 trucks from '77-87(91). I'll sell one spindle and locknut set for $25 shipped.

 

[nerraw117]

i was pretty sure the 6 and 8 lug spindles were differant, but i could be wrong. can i get some pics? my e-mail is [email protected]

 

[kennyw]

Only thing different is the 73-76 small bearing spindle. I've interchanged the '77 up between 1/2 and 3/4 ton axles without problems many times. I can get you a pic next weekend when I get home.

 

[muddybuddy]

ive got some as well. some surface rust but can easily be cleaned up. let me know.

 

[nerraw117]

can i get pics and how much?

 

[muddybuddy]

http://community.webshots.com/photo/435205835/2094763470066455273xxKNHx
http://community.webshots.com/photo/435205835/2187545820066455273FyJxlQ
http://community.webshots.com/photo/435205835/2717769750066455273Szlvjy

some more sanding and they would be good to go.
not the best, but i'd take $10 + shipping

 

[muddybuddy]

are you still looking for them???

 

[nerraw117]

oh yes i am so sorry about that. i thought i pmed you. they look a little too scored for me. mine i took off looked a tiny bit better and had a bearing seize. im looking for one a little better. but thx so much though.

 

[muddybuddy]

no problem

 

[kennyw]

Here is a pic of the better one.

 

[nerraw117]

is that a groove on the bottom where the bearing rides?

 

[kennyw]

No... just a shiney spot where the seal rides. It looks like a slight groove is starting to form there, but I can't feel it with my fingernail. No grooves in the bearing surfaces.

You need to remember the bearing race surface is where the bearing is gonna turn. The spindle needs to be round and smooth for ease of installation and to prevent distortion of the bearing race.

 

[HarryH3]

Steve, got your MO. The spindle is going out on the FedEx truck today.