32 spline front output

[88k5blazin]

i have an older style 10 spline front output shaft on my np 205 and i am looking to upgrade to the 32 spline front output. i just read somewhere that the divorced np205 t-cases have a 32 spline front output shaft. is this true? and what part is the bearing retainer? is it the round part that bolts onto the case behind the yoke? also can i take the whole assembly from my divorced case and just swap it right into the new case?

 

[1BEATK5]

any ford case will have it. divorced or not.

i think the dodge ones are 30spline divorced or not

yes the aluminium thing that has 4 bolts into the case behind the yoke is the retainer

on the last question. but i have heard that its easier.

 

[sixb]

i think the dodge ones are 30spline divorced or not

except for the 89-93 Dodges with a cummins.

 

[sweetk30]

all divorced 32 in and out. i striped 3 units all 32

and read and look here for info http://coloradok5.com/forums/showthread.php?t=253000 step by step pics and info.

 

[88k5blazin]

Awesome. That just saved me a few bucks

 

[sixb]

Awesome. That just saved me a few bucks

Exactly, I obtained my divorced Ford case for 30.00 which gave my 32 spline outputs and my slip yoke eliminator when I built my doubler.