What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

35 spline d60 warn premiun hubs

twoslo4five0

twoslo4five0

3/4 ton status
GMOTM Winner
Joined
Oct 5, 2006
Posts
6,616
Reaction score
73
Location
Living in a dump, VA
how strong are they??i know they arent as strong as a set of flanges but i know where a set is for about the same price as flanges....
 
I've heard they are close to the same strength as 30 spline hubs, but my decision (for drive flanges) was easy ;)

The only 35 spline hubs I've heard good things about are Teraflex but hardly anyone buys those so who knows.

NWF flanges are only $160 or so :dunno:
 
I've been running mine for a couple years. That's with some really low gearing, an ARB, Chromo shafts, and 42's. The only issue with mine is one was wanting to lock on its own. I fixed that though.

Running flanges was a pita! Especially trying to drive it on the street with a steep front driveline angle...
 
If you can get a pair of Spicer lockouts, get the internal gear broached to 35 spline and you will be set.
 
by pictures the warn prem junk is the same other than a better chrome housing and brass dial. same internal junk.

by a set of old spicers get new gm yellow n.o.s. dials off ebay for 72 + shipping. reman kit off ebay bolts/washers/orings for under 25 shipped. the broch/spline inner section to 35 spline for under 70ish . and have a super set of hubs.

i trashed my junky warn blacks for a set of ( thatk30guy ) used spicers. then got the ebay parts and have a super beefy set of lockouts for under 260. :eek1:
 
i have one spicer hub here but i need another...i once ran a welded front end with thoose spicer hubs and had alot of trouble unlocking the hubs...ive seen people run the premo's with a welded front end and have no trouble unlocking them
 
Here I go again....

[hyjack]

DPI, is that a DD Machine 241 Doubler or something else? I'd like to know more about it.

BTW, that is some seriously low gearing. :D :waytogo: :D

[/hyjack]
 
If you want strong hubs do the Spicer's like have been talked about. A good friend of mine runs them and has had great success with them. He runs 42's with a 6:1 doubler and absolutely beats the crap out of his rig and they havn't failed in over 5 yrs of tough wheeling. He snapped a non-neckdown 35spl Spicer axle a few months ago and his hubs were fine.

Dynatrac's new hubs are supposed to be really strong too but I think they are pricey.

Harley
 
From everything I have heard about the Warn 35 spl hubs is that they actually pretty weak. I believe it was Steve Fox who broke one or both of his brand new Warns on his first run out with them with 39.5's.

Harley
 
Hossbaby50 said:
From everything I have heard about the Warn 35 spl hubs is that they actually pretty weak. I believe it was Steve Fox who broke one or both of his brand new Warns on his first run out with them with 39.5's.

Harley
Click to expand...

I had good luck with mine, ran'm for 2 years...had it hoppin' some 44's..
I broke the ears off the stub...once too.:wink1:

I sold them, I'm using ploy's flanges now.
 
You must log in or register to reply here.

Latest Posts

Top Bottom