SubYuman
1/2 ton status
ANyone know where I can get them at a good price? Also, need at least one MT Classic II 16.5x9.75 wheel....ideas?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
37 Hummer tires
- Thread starter SubYuman
- Start date
84CUCV
3/4 ton status
try bergtire.com for the tires
hack500
1/2 ton status
fyi, I measured a set of old (bias-ply)and the new (radial) hummvee tires are smaller, unless the ones I measured were defects. the bias-ply were at 36" and the radial ones were at 34"
I dont know abuot the bias plys because I have never measured them but teh radials on my crew cab measured out at exactly 36".
Jishory
1/2 ton status
i have a buddy that is selling a new set, i can call him and see the price if you want.
Theres a few guys on ebay that has them...dont know if you get decent tires or not. But there is one in san diego that sells them, he says he usually always has good tires and you can go pick them up.
SubYuman
1/2 ton status
Got'em!
Found a guy on ebay,and I was the only person to bid...these thinga are almost new. I measured13/16" tread. Stil have nipples on 'em. Drove to San Bernardino (scared as hell I'd get a blow out), the went to 4 Wheel Parts in Riverside, bought a new ClassicII wheel and had it installed,. First thing I've had "done" by someone else in 5 years... The Edwards AFB hobby Shop isn't very well equpped!
Now that the idler arm/pitman arm/bearins and soon ball joints are good, I need an alignment.
I would still like to find a shop to do my gear swap...and I'm waiting for my rear disc kit frow BWP.
Anyone have a clue on where I can get my 14 bolt regeared for less than 4WP's $500 plus gears and master kit?
Found a guy on ebay,and I was the only person to bid...these thinga are almost new. I measured13/16" tread. Stil have nipples on 'em. Drove to San Bernardino (scared as hell I'd get a blow out), the went to 4 Wheel Parts in Riverside, bought a new ClassicII wheel and had it installed,. First thing I've had "done" by someone else in 5 years... The Edwards AFB hobby Shop isn't very well equpped!
Now that the idler arm/pitman arm/bearins and soon ball joints are good, I need an alignment.
I would still like to find a shop to do my gear swap...and I'm waiting for my rear disc kit frow BWP.
Anyone have a clue on where I can get my 14 bolt regeared for less than 4WP's $500 plus gears and master kit?
84CUCV
3/4 ton status
What did you put in to pull up the hummer 37s? i didnt get a thing. thx
search "military tires" on ebay and you will come up with alot of results.
SubYuman
1/2 ton status
How to find 'em....
I used "Hummer 37".
Still looking for the winch and a shop to regear...
TTT!!
I used "Hummer 37".
Still looking for the winch and a shop to regear...
TTT!!
