42" or 44" tire for a 16.5" wheel AND a 3/4 or 1 ton shaft

[TruckNutzDude]

Need ONE 42" or 44" spare tire to fit a 16.5" wheel. I will take other size rims if the rim comes with it but it needs to be 8 lug and clear a D60 without grinding.

Also need a 2 piece 3/4 ton or 1 ton driveshaft.

The closer to Mass. the better.

Thanks,
Rob

 

[84K5BD]

i have a 39.5 tsl mounted on a 16.5 wheel. was my spare when when i sold you those boggers. you can have it for free if you want it.

 

[TruckNutzDude]

i have a 39.5 tsl mounted on a 16.5 wheel. was my spare when when i sold you those boggers. you can have it for free if you want it.

PM on it's way.

 

[TruckNutzDude]

Bump 4/6/07

 

[thatK30guy]

I have two sets of two-piece rear shafts, both sets out of K30's.

One set was removed from a cab-and-chassis model.

The other set was out of a crew-cab model.

How long do you need? I can measure them tomorrow and let you know. If they're too long, you can shorten them easily.

All shafts are in excellent shape, no slop at all.

 

[vtblazer]

i have a 39.5 tsl mounted on a 16.5 wheel. was my spare when when i sold you those boggers. you can have it for free if you want it.

Not to hi-jack but if trucknutz doesn't take it, I've been trying to find that size spare.

I'd take it/buy it.

Let me know if you could, we leave for Rausch in may.

 

[TruckNutzDude]

Not to hi-jack but if trucknutz doesn't take it, I've been trying to find that size spare.

I'd take it/buy it.

Let me know if you could, we leave for Rausch in may.

I didn't take the tire but this post is very old.You'll have better luck trying to reach Bob on pirate, he doesn't spend much time on CK5 these days it seems.

 

[TruckNutzDude]

I have two sets of two-piece rear shafts, both sets out of K30's.

One set was removed from a cab-and-chassis model.

The other set was out of a crew-cab model.

How long do you need? I can measure them tomorrow and let you know. If they're too long, you can shorten them easily.

All shafts are in excellent shape, no slop at all.

The last one I got was from a 3/4 ton short bed with an auto and it was about 6" too long. Either one of those will work for my rig after I cut them down to size. How much do you want for one or even for both? Do you have the yoke for the rear of a 205 for the 1350 joint? I'm running a conversion joint and am down to my last spare...