marv_springer
1/2 ton status
Selling my Big Block Motor. Will not ship!
FunBuggy 454 Engine:
Been sitting since I dismantled the FunBuggy. Present Features:
Late 70's 2 bolt main block
458 cid (.020 over)
Keith Black Hypereutectic Pistons
10.2 CR
Edelbrock Oval Port Cylinder Heads (EDL-60459)
Edelbrock Performer RPM Intake
Summit Hydraulic Camshaft Advertised Duration 276/ 286, Lift .500/ .500
This motor ran well. I expect that it was capable of 400 Hp and 450 ft-lb Torque. w/ this cam, rpm limit was pretty much 5500 or so. I spent nearly $6k building it.
$3800.
Marv
FunBuggy 454 Engine:
Been sitting since I dismantled the FunBuggy. Present Features:
Late 70's 2 bolt main block
458 cid (.020 over)
Keith Black Hypereutectic Pistons
10.2 CR
Edelbrock Oval Port Cylinder Heads (EDL-60459)
Edelbrock Performer RPM Intake
Summit Hydraulic Camshaft Advertised Duration 276/ 286, Lift .500/ .500
This motor ran well. I expect that it was capable of 400 Hp and 450 ft-lb Torque. w/ this cam, rpm limit was pretty much 5500 or so. I spent nearly $6k building it.
$3800.
Marv
where u at?!? 
