6 point cage out of my blazer. mines a 76 and it fits under the roof. Might have I can unbolt and pull it out cause I cut the roof off. not sure if you can get it back in the same way. $500.00 I also got RCI Harnesses if you want to go with it. $125.00
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
6 Point Roll Cage with Harness mounts, Seattle
- Thread starter Tayven1
- Start date
IMO the price is a little high, but I am no cage expert. Specs on the cage? Manufacturer, Material? I am interested, but not sure if it will sit right in my 89. Are the seats bolted to the cage?
The A-pillars look like they come out close to the door (just how it was built?). It may just be the picture 2nd one down.
The A-pillars look like they come out close to the door (just how it was built?). It may just be the picture 2nd one down.
Reply to Roll cage
Yeah I started with the Smitty built Cage Kit. Then I added another 20 to 25 feet of tubing to make Sat Mounts, and a rear bar for the Harnesses. I think it would fit in yours but you may have to cut it once or twice to get it in. I would pull the whole thing out, got over the welds one time just to make sure they are good, then Cut in b pillar and get it back in, and cut it in a spot thats really easy to weld to. I'll make a deal on this stuff I just want to get it and all the other parts gone.
Yeah I started with the Smitty built Cage Kit. Then I added another 20 to 25 feet of tubing to make Sat Mounts, and a rear bar for the Harnesses. I think it would fit in yours but you may have to cut it once or twice to get it in. I would pull the whole thing out, got over the welds one time just to make sure they are good, then Cut in b pillar and get it back in, and cut it in a spot thats really easy to weld to. I'll make a deal on this stuff I just want to get it and all the other parts gone.
This cage would be a bolt in for 73-76 K5's. 77-91 you would need to rework the two legs behind the front seats to come down farther due to a change in the floor in 1977.
Look at the floor in his pics... compare it to your '89 and you should see the difference.
Look at the floor in his pics... compare it to your '89 and you should see the difference.
