What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

6" Skyjacker springs, body lift pucks, 35 spline drive flanges for D60

M

Mudzer

1/2 ton status
Author
Joined
Feb 17, 2000
Posts
3,636
Reaction score
2
Location
Missouri
6\" Skyjacker springs, body lift pucks, 35 spline drive flanges for D60

Im selling off some parts I no longer need. Parts are located in Central MO and can be shipped. Buyer pays for shipping. PM, post here or email me for shipping costs - include your Zip Code and whether it is a business address or residence.


Skyjacker 6" front springs for 73-91 K5 - these are in great shape and have not sagged. Poly Bushings included <font color="blue"> $175 plus shipping.</font>

Burgondy Center Console from 81 up K5 in good shape. No key for the lock. <font color="blue">$20 plus shipping.</font>

B&amp;M Megashifter with console Needs a new boot but all there otherwise. <font color="blue">$75 plus shipping.</font>

B&amp;M Starshifter without console Works great but no console with this. <font color="blue">$60 plus shipping.</font>

2" body lift pucks with bolts - <font color="blue">$20 plus shipping.</font>

35 spline broached D60 drive flanges - these have the standard steel caps and spacers to install 35 spline axles in your Dana 60 frontend. <font color="blue">$135 plus shipping.</font>





Email me for pics of these parts. [email protected]
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

[ QUOTE ]
1350 Driveshaft with slip this is from a 1 Ton K5 equipped with 6" lift and SM465/NP205 combo. I can measure length for you if required. $50 plus shipping.

B&amp;M Megashifter with console Needs a new boot but all there otherwise. $75 plus shipping.

[/ QUOTE ]

Intersted. What is the lenghts on the driveshaft (open and Closed) and is the shifter for a truck? Oh and how big around in the driveshaft?
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

So the S-Ton project is in full swing?

That is an awesome deal for the Iroks /forums/images/graemlins/thumb.gif, My friend is building a Heep and might be interested. I'll let you know.

You have Paypal right? (so you can accept a credit card)
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

Dibs on the seats, depending on shipping. I will pm you. /forums/images/graemlins/thumb.gif
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

I made a mistake on the driveshaft. I thought this was a shaft from when I had the SM465/NP205 combo. Its a shaft that will fit a doubler application in a K5 with 6" of lift and 1 Ton rearend.

Sorry about that. Its in the 36" long range.

The shifter is not a truck Megashifter, but the handle can be reached when its between the seats. Thats what I have in my truck currently.
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

Orion,

I have a paypal account. Let me know before he wants to make payment and we will work out delivery.

I'll be in St. Louis on the 17th and could deliver them that far.

Yep, Im getting ready to roll the body off my K5 and start pulling drivetrain parts. I have a set of 42" IROK's coming soon...
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

I replied to your PM, the seats are on hold with a deal pending with a local. /forums/images/graemlins/thumb.gif
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

let me measure mine it might work. how do the shifter look?
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

Ok I you will get the lenght that would be great. It might work. /forums/images/graemlins/ears.gif
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

Sounds good. /forums/images/graemlins/thumb.gif
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

Ok the last post I made did not come out right. lets try this again. /forums/images/graemlins/confused.gif

If you will get the lenghts from your driveshaft that would be great.
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

I measured the shaft. Its 38.25" extended fully and 34.25" collapsed. It has 4" of travel.

I also have a 1350 yoke for an NP205 that I'll sell for $25. /forums/images/graemlins/thumb.gif
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

Close but no cigar. how about the shifter? what kind of shape is it in? /forums/images/graemlins/thinking.gif
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

It is in good shape other than the boot has dry rot. Where are you located? Give me your zip and I can estimate shipping and we will deal. /forums/images/graemlins/thumb.gif
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

76511. Can you shoot me a picture? I am not worried about the boot I can get another.
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

Can I get a shipping estimate on the driveshaft to 98295?

Rene
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

I'll get you an estimate. Do you need the Yoke for the NP205 as well? I can also get you a pic. Did you see the measurements above?
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

I'll get a pic and shipping cost. /forums/images/graemlins/thumb.gif
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

Neil, it's for my friend. At rest he has 36" from the center of the u-joint cup on the T-case yoke, to the center of the u-joint cup on the yoke on the diff. Looks like your shaft will be about perfect for his needs.

Is your yoke for the 205 a 32 spline yoke? He has a 241 with a 1310 yoke and he wants to swap to the 1350 anyways so if it'll fit I'd have to say sure.

Rene
 
Re: (4) 39.5\" IROK\'s 90% tread, 4\" Superlift springs, 6\" Skyjacker springs

Yes, my yoke is the 32 spline 1350 yoke for an NP205 - which will work in his application. $50 for the shaft and $25 for the yoke and I'll get shipping. /forums/images/graemlins/thumb.gif
 
You must log in or register to reply here.

Latest Posts

Top Bottom