chiefheaphy
1/2 ton status
Would save me some time
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
60 front setup bearings
- Thread starter chiefheaphy
- Start date
Do you still have the old ones? If so, get a hone and drill to hone the inside bore out slightly.
If you still have the old races, cut thru one side with a band saw and you can use them to drive new races in. This will allow the old race to pop right back out easily.
If you still have the old races, cut thru one side with a band saw and you can use them to drive new races in. This will allow the old race to pop right back out easily.
