64" lift springs, brackets, perches, ubolts, plates, shackles..for 81-91 Blazer

[bhays]

I am going to upgrade my Jimmy suspension to a four link rear. The Suspension works great and has 16" of travel. Has scored over 750 on a 30 degree RTI ramp (~+1000 on an 20 degree RTI) Here is what is included:

3.5" 64" springs
custom powdercoated red shackles
custom powdercoated red rear frame brackets
custom powdercoated red froward frame brackets
Ubolts and plates
FOA shocks with resevors (coating discolored on bodies) new updated seals
Bolts, washers, and hardware

Here is some pictures:

http://coloradok5.com/forums/showthread.php?t=264147

I maybe willing to separate.

$950 OBO

 

[bhays]

Some pictures:

 

[chevysmithz71]

If you decide to separate please put me first in line for the shackles. Could I get the length center to center of holes? Thanks

 

[bhays]

If you decide to separate please put me first in line for the shackles. Could I get the length center to center of holes? Thanks

I will. The shackles are 40" apart center to center. If I remember this is the same as the 3/4 and 1 ton 14 bolt spacing. The half tons are wider, but I wanted more travel. They can be adjusted 1/8 each direction with spacers.

 

[chevysmithz71]

I think we misunderstood each other. I need just the shackles, not the hangers. Most shackles are 4-7inches long.

 

[bhays]

I think we misunderstood each other. I need just the shackles, not the hangers. Most shackles are 4-7inches long.

I believe they are 6 or 7" between pivot centers. I will measure the width between the hanger mounts.

 

[chevysmithz71]

Ok if you could give me the hole to hole measurement and top bushing width. Price too.
Thanks