CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
700R4-208 adapter same as 700R4-241?
- Thread starter Kyle89K5
- Start date
DPI
1/2 ton status
I think they are, but haven't tried to exchange the two. Anyway, I'd like to know too.
Here's some info that I've come up with so far.
<font color="red">Adapter,transfer case (K/V1,2 W/MD8) - 15597796
(NP208,NP241) </font>
This was in the part numbers post, so am I to assume here that they are the same?
I also found out that I'm not the first to ask this, but still have no deffinate answer out there.
Unanswered thread
Short answer thread
Another short answer
So can I take this as definitive proof that they are the same?
<font color="red">Adapter,transfer case (K/V1,2 W/MD8) - 15597796
(NP208,NP241) </font>
This was in the part numbers post, so am I to assume here that they are the same?
I also found out that I'm not the first to ask this, but still have no deffinate answer out there.
Unanswered thread
Short answer thread
Another short answer
So can I take this as definitive proof that they are the same?
84_Chevy_K10
Banned
I am pretty sure they're the same.
Anyone else looked at the two?
I've called a couple of yards around here, but I've only talked to the idiots so far, haven't gotten anyone that knows WHAT I'm talking about. Hopefully I can get two of them side by side to compare...
I've called a couple of yards around here, but I've only talked to the idiots so far, haven't gotten anyone that knows WHAT I'm talking about. Hopefully I can get two of them side by side to compare...
I'm like the others...same adaptor even though I haven't seen the 241 bare adaptor yet. But have heard and come to the conclusion that they are the same thing. /forums/images/graemlins/thumb.gif
I'll have a 241 adapter in my hands today or tomorrow (and hopefully my digital camera) if anyone wants/needs ID pics, or at least something to compare with.
DPI
1/2 ton status
I'd like to see some pics too!
Thanks!
Thanks!
So if I got this right (I'm slow so hang with me) The only difference that is between the two adapters is the mounting foot. And that is on one model, the other is the same.
Therefore, if I find a 700-208 adapter that has the same heighth mounting foot then it is the same as my 700-241 adapter?
This may be the best news yest /forums/images/graemlins/grin.gif
Therefore, if I find a 700-208 adapter that has the same heighth mounting foot then it is the same as my 700-241 adapter?
This may be the best news yest /forums/images/graemlins/grin.gif
outlaw612
1/2 ton status
I took this from AZblazors post in the "post your part #'s" in the Adavanced Previews Forum:
Here is the transfer case part number skinny:
Adapter,transfer case (K/V1,2 W/M40)(85-90) - 15597795
(NP208)
Adapter,transfer case (K/V1,2 W/MD8) - 15597796
(NP208,NP241)
Adapter,transfer case (V1 W/MT1)(91) - 15654927
(NP241)
Adapter,transfer case (K3/V3,W/M40)(85-90) - 15597799
(NP205)
Adapter,transfer case (V3 W/MT1)(91) - 15629600
(NP205)
RPO DEFINITIONS
MD8 - TRANSMISSION/4 SPEED AUTO (700R4)
MT1 - TRANSMISSION/4 SPEED AUTO THM R2(4L80E)
M20 - TRANSMISSION/4 SPEED, 117M,6.55 1ST (SM465)
M40 - TRANSMISSION/3 SPEED AUTO (TH400)
Note bold print, the 208 and 241 adapters for the 700r4 are the same #.
BTW, if you need one of these, send me a PM. I have 2.
Here is the transfer case part number skinny:
Adapter,transfer case (K/V1,2 W/M40)(85-90) - 15597795
(NP208)
Adapter,transfer case (K/V1,2 W/MD8) - 15597796
(NP208,NP241)
Adapter,transfer case (V1 W/MT1)(91) - 15654927
(NP241)
Adapter,transfer case (K3/V3,W/M40)(85-90) - 15597799
(NP205)
Adapter,transfer case (V3 W/MT1)(91) - 15629600
(NP205)
RPO DEFINITIONS
MD8 - TRANSMISSION/4 SPEED AUTO (700R4)
MT1 - TRANSMISSION/4 SPEED AUTO THM R2(4L80E)
M20 - TRANSMISSION/4 SPEED, 117M,6.55 1ST (SM465)
M40 - TRANSMISSION/3 SPEED AUTO (TH400)
Note bold print, the 208 and 241 adapters for the 700r4 are the same #.
BTW, if you need one of these, send me a PM. I have 2.
[ QUOTE ]
I'd like to see some pics too!
[/ QUOTE ]
Took some last night with my brand new camera, but couldn't figure out quickly how to get the pictures small enough so they can be viewed on a 19" monitor. /forums/images/graemlins/tongue.gif
Going to play around with it again tonight, and hopefully may have some up then.
I'd like to see some pics too!
[/ QUOTE ]
Took some last night with my brand new camera, but couldn't figure out quickly how to get the pictures small enough so they can be viewed on a 19" monitor. /forums/images/graemlins/tongue.gif
Going to play around with it again tonight, and hopefully may have some up then.
DPI
1/2 ton status
Cool! Thanks!
jimmy88
1/2 ton status
An 89 241 w/mechanical speedo bolted right up to an 88 700R4 with the original 208 adaptor.
OK, cast in number (looks to be same as part number, go figure!) is 15597796
May have to copy and paste the URL...
http://dyeager535.topcities.com/TablePics/241adapt1.jpg
http://dyeager535.topcities.com/TablePics/241adapt2.jpg
http://dyeager535.topcities.com/TablePics/241adapt0003.jpg
If anyone needs measurements (like thickness from mating surface to mating surface) let me know, I'll take them.
May have to copy and paste the URL...
http://dyeager535.topcities.com/TablePics/241adapt1.jpg
http://dyeager535.topcities.com/TablePics/241adapt2.jpg
http://dyeager535.topcities.com/TablePics/241adapt0003.jpg
If anyone needs measurements (like thickness from mating surface to mating surface) let me know, I'll take them.
La Barge
Registered Member
did the swap it is the same adapter mech or electric speedo it doesn't matter.
wayne
3/4 ton status
If you need an adapter for a 700r4 to 241 shoot me an offer via pm. I have a couple here that I will never use. They are the short ones and one is from my 89 and the other is from Donna's 90.
