16705088452548934954845564776490 by https://www.flickr.com/photos/97391199@N06Just about finished,
Dum dum, installed behind metal and screwed tight
Need to build ogee at the top
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
72 Jimmy PO has me PO'd
- Thread starter jaros44sr
- Start date
16705088452548934954845564776490 by https://www.flickr.com/photos/97391199@N06Just about finished,
Dum dum, installed behind metal and screwed tight
Need to build ogee at the top
Starting point for THE OG I need an inside curve, than an outside curve
16707727410555148721082521205135 by https://www.flickr.com/photos/97391199@N06
16707727410555148721082521205135 by https://www.flickr.com/photos/97391199@N06
16709381838181471526007306620623 by https://www.flickr.com/photos/97391199@N06Ok, did it with 2 pie cuts
Now just have to make top and bottom pieces to play nice
16711211146978262083135183993325 by https://www.flickr.com/photos/97391199@N06Playing nicely together
1671204747935807486802781101394 by https://www.flickr.com/photos/97391199@N06Original piece on magnet
You're going to be 99% new sheet metal when you're done with all of this
16712780486788474275377205009839 by https://www.flickr.com/photos/97391199@N06Thanks AJ, that's my goal
If your rendering had live bushes in front of the truck, I would think it was a running,driving truck
That guy has amazing skills
Last edited:
I like to use dumdum to keep my nut in........I know, know, thats what she said
ALWAYS make sure your allen key is fully seated or you will get a burr and strip the screw
16712788090331768172348920021080 by James Jaros, on Flickr
ALWAYS make sure your allen key is fully seated or you will get a burr and strip the screw
16712788090331768172348920021080 by James Jaros, on Flickr
Last edited:
16712807919184463422914489044642 by https://www.flickr.com/photos/97391199@N06What DOES AMD expect of me, having forming dies to finish their product........not knocking as we would have zero patch panels and whole bodies if not for them
It looks like it needs 2 more bends
I have 2 wheel well opening patch panels from a pick up truck, yes they fit a Jimmy, and don't know how to fit them
16726713581084422214247618110369 by https://www.flickr.com/photos/97391199@N06Had to relocate transmission dip stick, interfered with exhaust manifold and spark plug wire
Plus didn't like where the thing that goes into the exhaust, controls AFR, can't think of the name at the moment
O2 sensor.
Martin
Martin
Thanks Martin, senior moment
16673998653796338265152678591138 by https://www.flickr.com/photos/97391199@NThought I would post up some pics from the prior parts of my build
Had the can maid up by PSR, their design
I'm going to sell EMS billet hood hinges, just to much of a hassle to get the heating system to work
Last edited:
20191009_130033 by https://www.flickr.com/photos/97391199@N06The lower radiator hose took some figuring
