76 build thread

[Wicked Wolf Auto]

Got the 60 in this weekend along with high steer, need to get some new shock tabs, the high steer tie rod interferes with the stock mounts, High steer is a dream i can spin the wheel at a dead stop with one finger

and pics...can't wait to get the new tires and rims bolted up!!

 

[76zimmer]

Allen, how did those seats work out?
They are out of a 03 Silverado right. Those have integrated shoulder/lap belts?

I like the mods, does the high steer come close to the oil pan (SBC right) and where are you going with the shock mounts?

 

[Wicked Wolf Auto]

Allen, how did those seats work out?
They are out of a 03 Silverado right. Those have integrated shoulder/lap belts?

I like the mods, does the high steer come close to the oil pan (SBC right) and where are you going with the shock mounts?

they are all of of 03's and have integrated belts they are working great although I'm not sure I like them in the back They're pretty high so rear view visability is limited if and when I find a good rear gray stocker I'm going to pull them.

oil pan clearence is close but shouldn't be an issue, new shock tabs will go right on top of the axle

 

[Wicked Wolf Auto]

Got the 14 bolt under it tonight, unfortunatly I opted to wait to do the shackle flip until later when I do the TBI conversion, since I have to drop the tank, the ubolts I have are too short with the blocks So it's on jack stands until tommorow.

 

[Wicked Wolf Auto]

Decided not to spend $50 for new ubolt just to put the flip in later so the 56's and flip are in.

Ford shock towers are kicking my ass in this 100 degree weather so I opted to throw the stock tie rod back on and install the shocks in the factory location.

Took it for a drive around the block and the front brakes make horrendous noise so I'm going to have to change out the rotors and pads.

 

[Wicked Wolf Auto]

Poser pic