big83chevy4x4
3/4 ton status
8 lug backing plates and bearing hubs from a 3/4ton 10 bolt.
rotors are very rusty, i will remove them if you want. bearing hubs are in good shape, i will include the bearings, i did not look at them to see if they were good or not. backing plate have some surface rust on them.
i also have some large spindles, they need the bearings for the stub shaft. they are not needed if your converting a 10 bolt or later d44, the early d44 need them.
would perfer a pickup, or i can meet somewhere nearby, they are quite heavy.
make offer
rotors are very rusty, i will remove them if you want. bearing hubs are in good shape, i will include the bearings, i did not look at them to see if they were good or not. backing plate have some surface rust on them.
i also have some large spindles, they need the bearings for the stub shaft. they are not needed if your converting a 10 bolt or later d44, the early d44 need them.
would perfer a pickup, or i can meet somewhere nearby, they are quite heavy.
make offer
