8 to 6 lug adaptor

[lamberthkp]

does anyone have a set or know a place that makes them, need to get my 14sf under my blazer before next month. thanks Keenan
i did search ebay and a few other places no luck yet.

nevermind found what i needed, thanks for the help

 

[thatK30guy]

does anyone have a set or know a place that makes them, need to get my 14sf under my blazer before next month. thanks Keenan
i did search ebay and a few other places no luck yet.

I want one of these, too, but dont know exactly how thick I need to make the 14SF track as the same width as the 10 bolt front.

 

[lamberthkp]

hey i found some 6 lug axle shafts for 14sf yesterday for $145 on ebay just type 14sf in the parts and you should see them somewere in it. http://cgi.ebay.com/ebaymotors/GM-Chevy-9-5-9-1-2-14-Bolt-Rear-Axle-Shaft-31-5-6-Lug_W0QQcmdZViewItemQQcategoryZ33728QQihZ015QQitemZ250010786695QQrdZ1QQsspagenameZWDVW

 

[thatK30guy]

Gotta becareful when buying the 14SF shafts in 6 lugs as there are two different lengths on each side. I don't mean the left and right side being different lengths. I mean there are 2 different specs on both the left and right side. One is wider than the other but can't remember all the info about them.

 

[midnitewarya]

I would figure the shaft length out and go with that. It'll end up being cheaper, safer, and more dependable than using adatpors.

 

[Big Truck]

for all who are interested I found some 8 lug to 6 lug adapters here



http://www.truckn-store.com/product_list.asp?id=1472

 

[Cricket]

This was in the CK5 Product Review section.

http://coloradok5.com/wheelspacers.shtml