audioslave1123
Registered Member
PARTING TRUCK OUT....TELL ME WHAT YOU WANT...Willing to ship or drive an hour to meet...Any part needed let me know
1985 Chevy K20 Pick Up 8' Bed $1700 (Moscow PA)
This truck has been a project of mine for awhile now but it is time to let it go
Engine: 350 V8
Transmission: TH350
Transfercase: NP208
Front Axle: Dana 44 4.10 gears
Rear Axle: Corporate 14 bolt SF (9.5” ring gear) 4.10 gears
Suspension: 4” Tuff Country EZ rides in the front, blocks in the rear
Tires: 37” Goodyear Wrangler radial hummer tires also includes a mounted spare in the bed, these tires are fairly new and have minimal miles on them
Exhaust: Dual 3" Flowmaster 40 series
Modifications:
New Battery 2 years ago
Warn Premium locking hubs
Rancho HD steering damper
Front axle was rebuilt with MOOG ball joints last summer
Rear brake cylinders replaced last summer
Rebuilt front driveshaft balanced and with new u-joints done last summer
New Distributor, plugs, and wires replaced last summer
Rebuilt Holley carb also done last summer
Front winch cradle/bumper made from 1/4” steel
Off Road Design sway bar disconnect
Off Road Design Steering box brace
Extended rear brake line
Brand New off road suspension bucket seats
60” high-lift jack
Off road lights mounted in the front, on the bed rails and on the rear bumper for reverse lights
DIY4X Heavy Duty 6” shackle
Energy Suspension Polyurethane bushings for sway bar and spring frame mounts
The front fenders, inner fenders, hood and doors were all replaced
Aluminum diamond plate tool box
Parts Included:
16 gallon Summit Racing Fuel Cell with all AN fittings and NPT fittings
A pair of 5 point harnesses
Autometer Phantom series gauges all electric (water temp, volts, oil pressure, and tach)
York air compressor with new main bearing replaced and bracket for an on board air setup
Front extended brake lines
A pair of heavy duty tow shackles
This is a project truck, the interior is stripped down and there is still some work that needs to be done, it starts and runs great, there is some typical Chevy rust on the cab corners and rockers, the fenders and doors are clear of rust and the bed has only a few very small spots
1985 Chevy K20 Pick Up 8' Bed $1700 (Moscow PA)
This truck has been a project of mine for awhile now but it is time to let it go
Engine: 350 V8
Transmission: TH350
Transfercase: NP208
Front Axle: Dana 44 4.10 gears
Rear Axle: Corporate 14 bolt SF (9.5” ring gear) 4.10 gears
Suspension: 4” Tuff Country EZ rides in the front, blocks in the rear
Tires: 37” Goodyear Wrangler radial hummer tires also includes a mounted spare in the bed, these tires are fairly new and have minimal miles on them
Exhaust: Dual 3" Flowmaster 40 series
Modifications:
New Battery 2 years ago
Warn Premium locking hubs
Rancho HD steering damper
Front axle was rebuilt with MOOG ball joints last summer
Rear brake cylinders replaced last summer
Rebuilt front driveshaft balanced and with new u-joints done last summer
New Distributor, plugs, and wires replaced last summer
Rebuilt Holley carb also done last summer
Front winch cradle/bumper made from 1/4” steel
Off Road Design sway bar disconnect
Off Road Design Steering box brace
Extended rear brake line
Brand New off road suspension bucket seats
60” high-lift jack
Off road lights mounted in the front, on the bed rails and on the rear bumper for reverse lights
DIY4X Heavy Duty 6” shackle
Energy Suspension Polyurethane bushings for sway bar and spring frame mounts
The front fenders, inner fenders, hood and doors were all replaced
Aluminum diamond plate tool box
Parts Included:
16 gallon Summit Racing Fuel Cell with all AN fittings and NPT fittings
A pair of 5 point harnesses
Autometer Phantom series gauges all electric (water temp, volts, oil pressure, and tach)
York air compressor with new main bearing replaced and bracket for an on board air setup
Front extended brake lines
A pair of heavy duty tow shackles
This is a project truck, the interior is stripped down and there is still some work that needs to be done, it starts and runs great, there is some typical Chevy rust on the cab corners and rockers, the fenders and doors are clear of rust and the bed has only a few very small spots
Last edited:
