sta500666
1/2 ton status
Like to find a corvette TPI around the midwest to pick up. Tell me what you have and throw a price at me!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
'86 and up TPI
- Thread starter sta500666
- Start date
I have the intake on up out of an '87 vette. Will need to take pics of everything I have as its not complete.
I also have the roller cam and lifters from this same car, too. Interested in them, too?
sta500666
1/2 ton status
When you say the intake, do you just mean the manifold, or the whole unit with mass air meter/throtle body? Do you have the computer or wiring harness by any chance?
Also, do you think this would bolt on to a 1976 350 no problem??
Also, do you think this would bolt on to a 1976 350 no problem??
I have the intake on up. Whats missing are the little torx bolts to fasten the runners to the intake and the plenum. I have the throttle body, too. One side of the runners has a hole in it. I have the fuel rails, too.
I don't have the computer or any wiring. Just the intake on up. I need to get a pic of everything I have so you can see for yourself.
I don't have the computer or any wiring. Just the intake on up. I need to get a pic of everything I have so you can see for yourself.
It will bolt to any SBC but I believe you need to address to the heads as there are different bolt angles. Ask questions like this in the FI forum. They chat about all types of fuel injections.
sta500666
1/2 ton status
thatK30guy said:
Yeah I saw that, I'm ganna look some threads over, but for sure take some pics cuz I'm interested!! It's either this or a Holley Truck Avenger and I see that as a temporary fix to a permanent off-road problem!
I've got a Vette set up here in VT if your willing to do the shipping thing.
(86 or 87) can't remember.
Can post pics if your seriously interested. $850.00 shipped.
Everything is included.
(86 or 87) can't remember.
Can post pics if your seriously interested. $850.00 shipped.
Everything is included.
sta500666
1/2 ton status
vtblazer said:
When you say everything included you mean computer and all that?? You should find out if it is an 86 or 87, cuz if its an 86 it will bolt right on to my heads. you should post some pics
I have a Complete TBI setup off my 91 Crewcab if your interested.
sta500666
1/2 ton status
rfda_454 said:
nah, its either ganna be tpi or a truck avenger carb. thanks anyway tho!!
i have a holly truck avenger carb too if thats what your looking for.
sta500666 said:
Yep, it's an 86 and complete.
ECM, Dizzy, Manifild, Runners, Injectors, fuel pump...etc.
I'll get pic up here for ya today.
Service number on the ECM: 16198259
Last edited:
So I'll be late for work today... 
But here's the pics.
It's been modified to run up into the higher RPM range, unlike a stock TPI.
I got the original harness with it and the guy said it was all marked and ready to install but you know how that works out, so I bought a Painless harness which I'll include at no additional charge.
(I paid 900 shipped
)
It is also complete with a K&N filter and all the air ducting.
But here's the pics.
It's been modified to run up into the higher RPM range, unlike a stock TPI.
I got the original harness with it and the guy said it was all marked and ready to install but you know how that works out, so I bought a Painless harness which I'll include at no additional charge.
(I paid 900 shipped
)It is also complete with a K&N filter and all the air ducting.
sta500666
1/2 ton status
rfda_454 said:
If I get a truck avenger I need the 670 electric choke. if its that one, how much?
sta500666
1/2 ton status
vtblazer said:So I'll be late for work today...
But here's the pics.
It's been modified to run up into the higher RPM range, unlike a stock TPI.
I got the original harness with it and the guy said it was all marked and ready to install but you know how that works out, so I bought a Painless harness which I'll include at no additional charge.
(I paid 900 shipped
It is also complete with a K&N filter and all the air ducting.
Give me a couple of days to think it over, I need to talk to a few people about it, and I may have some more questions for ya. The parts look great tho! I see only one of the runners, I assume you have both pairs? And the outter sides arnt dinged up? (cant tell from the pics). Also, have all the knock sencors?
When was the last time you had the system running? And just to make sure, you WEREN'T running it on the alluminum corvette heads were you??? (I dont feel like buying new heads).
Last edited:
Whatcha' think?
Should I box it up or put it back on the shelf?
Thought I posted the pics of the runners, sorry here they are.
Should I box it up or put it back on the shelf?
Thought I posted the pics of the runners, sorry here they are.
sta500666
1/2 ton status
Man it looks great, but after thinkin about it for a while I have desided to just go with a Truck Avenger carb... I really can't afford TPI as of right now and with going to school and all, I don't have time to install.
Sorry for makin you take pics. Wish I had the time! You shouldn't have a very hard time sellin it.
Sorry for makin you take pics. Wish I had the time! You shouldn't have a very hard time sellin it.
