87-91 Stock Blazer Exhaust hangers

[RichGonn]

Could someone please post a couple of pictures of the stock exhaust hangers on a TBI K5? Im restoring my truck and am redoing the exhaust and replacing the stock muffler and cat with an aftermarket Catco cat and a thrush muffler. I am planning to use basically the stock exhaust configuration, just with improved components.

Stock Y pipe to the Catco cat, a straight piece of 3 inch pipe to make up for the extra room from the smaller cat, stock intermediate pipe, thrush muffler with stock style inlet and outlet locations and stock tailpipe. I have all my new components (besides the stock intermediate pipe, it'll be here soon)

So basicly, I just need to see the hangers for the tailpipe (and how/where the hanger is welded on) and the hanger for the cat/cat area. If I remember correctly, those were the only two, but I could be wrong

Thanks in advance for the help!

Rich

 

[BlazerFarm]

I had a minute so grabbed some shots on my 1990. Hope it helps. If you need something else in more detail let me know.

Driver's side hanger behind cat.

Driver's side tailpipe hanger.

 

[dyeager535]

What diameter is the tubing on these things? Did they finally go to 3"?

Going to be re-doing mine eventually, will probably keep the stock hangers if I can.

 

[RichGonn]

I had a minute so grabbed some shots on my 1990. Hope it helps. If you need something else in more detail let me know.

Driver's side hanger behind cat.

Driver's side tailpipe hanger.

This is great, thanks!!