88 BlazerParting Out new Orleans

[nemeth21]

Time to go......

I will be parting out this 88 K5, contact me if your interested in any specific part.

Here are a few specifics. Motor ceased up 4 years ago. Motor was pulled and I decided to renovate the interior of the track and replace the motor with a stronger powerplant. Interior is 80 complete, I will be posting more photos.

3 years ago, 1st child. This did not help the renovation.

I purschased a stroker 383 EFI 450HP engine from A&R Racing which never made it into the truck. Still sits in the garage. Purchased for $5800.00 complete. I will be selling for $4000.00 and will be posting specifics.

3 Days ago, 2nd child. This will officially never get completed.



700R4 - Reconditioned less than 100 miles on it.

Complete stock drive train transfer case, drive shafts, axels.

Body panels mostely in excellent condition

All glass perfect

Front Seats beautifully re-upholstered two tone. I will send fabric samples to any serious inquiries

Rear seat original excelent condition

Most of every interior trim upholstered to match seats

 

[chalet2506]

Man that's a nice interior. What's the price for everything but the engine?

 

[munepit]

Congrats on the new addition to the family!! Sorry your getting rid of the K5.

The center console, do you have the cup holder piece? If so, how much do you want for it? Also, do you have a dash pad? Thanks and congrats on the new little one.

 

[nemeth21]

Man that's a nice interior. What's the price for everything but the engine?

$4000.00 For everything minus the Nav/DVD Unit (Already Sold) and The Engine.

I have well over $2500 into the interior, of the truck. Most of all the pieces are there. One piece missing that comes in mind is the lower trim piece on the passenger seat covering the recliner lever. Everything else present. I plan on laying out all the extras and photo all the additional panels tomorrow.

I can even arrange the shipping for a cost of .40 cents a mile. I have a car trailer.

 

[nemeth21]

Congrats on the new addition to the family!! Sorry your getting rid of the K5.

The center console, do you have the cup holder piece? If so, ho much do you want for it? Also, do you have a dash pad? Thanks and congrats on the new little one.

I do have the cup holder. The doors of this truck have been closed for 2 years when I stopped all work. I took the photos as is. The dash is in the back and is upholstered in the darker embossed fabric. (High quality vinyl, feels and looks like leather)

I first want to see if anyone is interested in the whole deal.

If or when I start to part it out I will contact you first.

 

[nemeth21]

If anyone is interested in the shell/body, the entire cab from the front floor boards to the rear of the cargo has been coated in 2 layers of DYNO Mat. I did this to reduce noise and vibrations, it really reduced the interior noise level to about half. I spent about $1500 to do this, the entire floor from front to back under the dyno mat is in excellent condition. As I mentioned in the first thread this is a souther truck, never seen winter salt roads, the last four years it has not even been on the road and has been stored indoors. (Barn) The last 12 years of it's life has been under roof. One of the most solid bodies I have seen.

One noticeable spot of cancer is in the driver side front inner wheel well, this is a bolt on replacement part.

 

[nemeth21]

Full Interior Looking to get $2500

I am looking to get $2600 for ALL interior pieces which are viewed in the following photos. Buyer pays for the shipping I will crate all pieces.

This will be a complete package for someone trying to complete a K5 build. Includes all shown speakers.

Items Included:
Front Bucket Seats - Both operate properly
Rear Bench - Operates properly
Dash - Minus Nav Unit/Sold
Door Panels Driver Side and Passenger Side
Lower Carpet Door Trim Both Doors
Upholstered Head Liner
Upholstered Windshield Column Trim/WComponent Speakers (Punch)
Center Console
Front and Rear Carpet /w padding
Rear Upholstered Side Panels with Rockfort Fosgate Punch 6x9 Speakers
Upholstered Gas Fil Tub
Front Floor Board Side Panels Upholstered Both Sides
Upgraded Overhead Light and Panel Upholstered
Chrome Sill Guards

Cab View Photo 1

Cab View Photo 2

Cab View Photo 3

Dash Board Photo 4

Dashboard Photo 5

Dashboard Photo 6

Passenger Door Panels Photo 7

Driver Side Door Panel Photo 8

Rear Bench Seat Driver Side View Photo 9

Rear Bench Seat Passenger Side View Photo 10

Rear Seat Area Carpet Trim Photo 11

Upgraded Overhead Light and Panel Photo 12

Driver Side Kick panel Photo 13

4x4 Shifter Trim Photo 14

Center Console Photo 15

Rear Panel Passenger Side Photo 16

Rear Panel Driver Side Photo 17

Headliner and Assorted Trim Photo 18

Side Panels with 6x9 Rockfort Fosgate Punch Speakers Both Sides Photo 19

Passenger Bucket Seat One of the few missing Trim Pieces Photo 20

 

[Rabb91]

Looks good. Keep us posted. May be interested in a few parts..

 

[kdoske]

I tried sending you a PM but after I click send its not showing up in my sent items so I'm not sure if its actually sending. I'm also in new orleans and im looking to buy the following.

• Both Doors with all internals, windows, and Side View Mirrors
• Rear hatch with internals and window
• Rear cover with windows
• Grill
• Hood
• Entire steering column with wheel
• Gage Cluster

I am also curious how much the entire shell/body would cost without the frame or transimissions/axles, etc, etc. I'm also not interested in any of the interior. Might just be easier to go that way and swap the whole body instead of all the little things I listed above. Im not sure, let me know.