GonicGM
1/2 ton status
Might put a Edelbrock TBI Performer 454 on 87 V3500. I'm unsure on fuel line clearance and component placement when removing from my low rise 4bbl intake/TBI spacer and placing on the Edelbrock. As the 91 Sub 454 had the tall iron intake, I'm guessing, fit and placement of components and fuel lines will be better as the manifold better emulates the Edelbrock. With that in mind. I would like to buy the following from 91 Suburban 454.
Fuel lines from TBI to frame.
EGR solenoid and bracket
MAP Sensor and bracket
Hard vacuum lines
Spark plug wire looms and brackets.
Basically anything manifold up
Fuel lines from TBI to frame.
EGR solenoid and bracket
MAP Sensor and bracket
Hard vacuum lines
Spark plug wire looms and brackets.
Basically anything manifold up
