Over Christmas I wanted to re -do the '91. Well...it took a bit longer than expected and still has lots of little jobs to be done but it's up and running again now!
I went from a bog-stock truck to a 4" Ez ride lift/zeros on the front and a shackle flip/zeros on the rear. Edelbrock front shocks, procomp rears.35" BFG MT beadlocked.
I swapped in the 10 and 12 blts off of my old '78 as I'd just put 4.10's in them with a lockright rear before I cut the old fella up (rusted to hell).
ORD's crossover, bolt in brace and hydro assist which I have since removed as it was too slow for street use for me. HAD rear shaft with CV.
The motor is rebuilt with flat tops +.030, Edelbrock cam and manifold. Trans is full of TCI clutches and shift kit and an RV converter.
Kilby OBA is mounted but I've yet to mount a tank and plumb it in.
No real reason for the post....I just know you all like looking at pics!!
First pic is just of the '78 being recycled the rest are just ramdom shots of the build.
I went from a bog-stock truck to a 4" Ez ride lift/zeros on the front and a shackle flip/zeros on the rear. Edelbrock front shocks, procomp rears.35" BFG MT beadlocked.
I swapped in the 10 and 12 blts off of my old '78 as I'd just put 4.10's in them with a lockright rear before I cut the old fella up (rusted to hell).
ORD's crossover, bolt in brace and hydro assist which I have since removed as it was too slow for street use for me. HAD rear shaft with CV.
The motor is rebuilt with flat tops +.030, Edelbrock cam and manifold. Trans is full of TCI clutches and shift kit and an RV converter.
Kilby OBA is mounted but I've yet to mount a tank and plumb it in.
No real reason for the post....I just know you all like looking at pics!!
First pic is just of the '78 being recycled the rest are just ramdom shots of the build.
Last edited:
I wish I could hear what some of them are saying.
