91 rear shoulder seat belt bolt in roof

[wildweaselmi]

Does anyone happen to know what bolt holds the retractor in the roof on a 91 K5 Blazer?

I believe it requires a torx bit T35H or T40H or T47 but I lost them during some cleanup and I was running the softtop for awhile and now the bolts are missing. I have zero idea where to get replacement bolts or identify what bolt should go in there.

Any help is very appreciated.

 

[wildweaselmi]

Okay, several trips to Tractor Supply I found the answer. Each seat belt bolts to the roof with two M8-1.25 x 40 bolts (so you need a total of four).

 

[6872xtc]

I just saw this thread, but I couldn't tell you much past the fact that they are metric. I had to find some bolts back in 2012, but I wouldn't know what they were now!


Glad that you got it figured out!

 

[muddybuddy]

Glad you figured it out.

You had the right idea running the soft top, much easier to stick to that, and swap to the older style rear seat belts. I assume with soft top/no top you had no seat belts aside from the rear center?