96 s-10 2dr non-ZR2, easy lift?

[Cornfield creations]

Is there an easy lift for these? I thought about cranking up the torsion bars a little but the upper control arms are so short it seems the camber gets thrown off real quick, also thought about an add-a-leaf in the rear or longer shackle. I just didn't know if it's worth the money to do anything. Eventually wanting to do a SAS, and spring over. But thats later

 

[four_by_ken]

Pretty sure they make the torsion bar keys for these. Basically like cranking the torsion bars, but doenst f' up the ride as much. But, you can only get a couple inches this way.

In the rear... add-a-leafs or shackles. Or you could do a spring over in the rear, but then your rear would be lifted much higher than the front.

I would go with the torsion keys and shackles/add-a-leaf with a body lift.