? about clutches

[77crewcab]

Wondering what ya'll recomend for clutch and flywheel for a daily driver. This would be in a 2WD Crewcab with ocaisional towing. wondering if the plain Duralast from Autozone would work fine or if I should go for one of the more expensive brands like Hays, or Luk. Also what type of flywheel? Thanks.

 

[77crewcab]

tops

 

[sweetk30]

well you get what you pay for. and also who wants to chance bench pressing a 4 or 5 speed truck trans more than 1 time only to find cheep clutch was bad.

 

[skelly1]

The biggest, baddest clutch you can buy. If your flywheel is thin, get one too. I re-used my old flywheel and spent a ton on a custom clutch and it still chatters.

 

[Jishory]

i have a centerforce dual friction, its nice not having to worry about it

 

[koldsimer]

Get a Luk Pro-Gold. I have said it 100 times before. It's the best clutch i have ever used- never once slipped, perfect modulation/feel and it has never let me down. Get the 12" one if your flywheel can accomodate it- most will.

 

[Blazer1970]

Get a Luk Pro-Gold. I have said it 100 times before. It's the best clutch i have ever used- never once slipped, perfect modulation/feel and it has never let me down. Get the 12" one if your flywheel can accomodate it- most will.

I agree, get a Luk. Do not buy the cheap one from Autozone. A guy on another board just put one in and it is out of balance - he will have to tear it out again.

 

[Burt4x4]

Get a Luk Pro-Gold. I have said it 100 times before. It's the best clutch i have ever used- never once slipped, perfect modulation/feel and it has never let me down. Get the 12" one if your flywheel can accomodate it- most will.

This is what I run too...so far it is working great!
You won't save a dime if you have to doit twice.

 

[tarussell]

Add another vote for the Luk products ! There are a loy of great clutch manufacture's out there and the Luk stuff is near the top of the list . BTW most parts Autozone carries doesn't make anyones top list........


Tom

 

[76zimmer]

X-2 7 resurface the stock flywheel, you'll be happy with it.

 

[77crewcab]

Thanks for the input guys