adapter ujoint????

[unclematty]

does anyone know if I can get a ujoint that will allow me to mate yokes of different sizes, I'm joining the d24 and the sm465. /forums/images/graemlins/dunno.gif

 

[84_Chevy_K10]

I've got books full of part numbers.

Let me know what you need and I'll get you a part number.

I either need to know application or dimensions of the joints.

 

[ugly_blazer]

When I had my intermediate shaft made, I had them put a yoke for an S44 on one end and a 1310 on the other end. If you need to make a shaft then maybe this could be an option?

 

[unclematty]

I prefer not to use a short shaft so tim I'll be given you a tap as soon as I get the spline counts on both, thanxM /forums/images/graemlins/waytogo.gif

 

[ugly_blazer]

Oh, ok. Are you going to connect the tranny to the t-case with just 2 yokes and a u-joint?

 

[84_Chevy_K10]

Don't both getting me spline counts. Get me dimensions of the joints that fit in the space.

 

[unclematty]

Tim, I will talk to you tomorrow, with those measurments. thanx /forums/images/graemlins/waytogo.gif

 

[unclematty]

one side needs to be3 3/16 in length and1 1/16 in cap diameter, the other side needs to be3 5/8 in length and 1 3/16 in cap diameter, hoping!! /forums/images/graemlins/whistling.gif /forums/images/graemlins/whistling.gif