Alignment issues

[cveklund]

I have a 80 k5 with 6in lift and 35s. It seems to want to slowly start pulling to the right. I looked at my fron axle and it seems the pass side is a little further to the back of the truck than the driver side. I looked at my frame and it looks like it has been fixed in the wheel well like it was hammered back out and the fron tleaf mount is now about 1/8 to 1/4 inch further back. How would i have that fixed? Could an alignment shop do it or do i need to take it to a frame shop first? Sorry for the long post.

Thanks,
Chris

 

[imiceman44]

I have a 80 k5 with 6in lift and 35s. It seems to want to slowly start pulling to the right. I looked at my fron axle and it seems the pass side is a little further to the back of the truck than the driver side. I looked at my frame and it looks like it has been fixed in the wheel well like it was hammered back out and the fron tleaf mount is now about 1/8 to 1/4 inch further back. How would i have that fixed? Could an alignment shop do it or do i need to take it to a frame shop first? Sorry for the long post.

Thanks,
Chris

I would have a frame shop look at it first.
If they can fix it quick and cheap enough do it, if not there are frames out there you can get for cheap.
I don't have K5 frames anymore, but some truck frames that I would sell for $100.
You might even find some for free.

 

[cveklund]

Thanks IceMan. Off to the frame shop I go.