CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

All kinds of stuff

t89blazer, I am in the process of working out a deal on the top. I'll let you know if it falls through.

1979jimmy350, your cluster will go out today. Thanks! :waytogo:
 
do you have a tranny/tcase crossmember that will fir a 91 K5? I have a 700r4 and NP208 t Case
 
I do, but it is rusted through in places. If you just want the actual seat latches they may be OK, but you aren't going to want the whole bed.
 
Pics of the latches (ignore all the other junk). How much of a flange would you want around them? I figure I'd just buzz them out with a cut-off wheel or sawsall.

P1010015.JPG

P1010016.JPG

P1010015.JPG

P1010016.JPG
 
Pics of the latches (ignore all the other junk). How much of a flange would you want around them? I figure I'd just buzz them out with a cut-off wheel or sawsall.

View attachment 70678

View attachment 70679

I guess look under the truck and see how far they go and just make sure i get all of it, i am putting them in a truck that never had them so im not sure exactly how they fit
 
Top has sold - or rather traded. Thanks Kjunky5!

1979Jimmy350, I got your floor mounts cut out. I just need to get them in the mail. They'll go out this week.
 
Is the motor a 350? how many miles? Id be interested in it and the tank. Can you ship? 06320 is my area code. I could pick up at a dock.
 
Yes it is a 350. I don't have the ODO anymore, so I'm not sure on the mileage. It ran well though. No smoke, good oil pressure, never too hot....

I've never shipped anything that big, I'll look into it.
 
Top Bottom