CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
anyone have pic's of a 4" lift on 35/12.5 tire 73/87 model
- Thread starter MEGALADON
- Start date
GEORGIA GABE
1/2 ton status
heres mine
heres my 87 4inch rough country lift, 35/1250 r15 bfg mts
this is what 4 inch and 33s looks like
heres my 87 4inch rough country lift, 35/1250 r15 bfg mts
this is what 4 inch and 33s looks like
91GMCSuburban
1/2 ton status
if you've got 35's and wheel, and don't want to cut some of your truck, go with the 6". I have 4" with 33's and I still get rubbing.
GEORGIA GABE
1/2 ton status
yep
Hes right, I got some rubbing with the 33s, with some fender trimming you can eliminate 90% of the rubbing with the 35s.
Hes right, I got some rubbing with the 33s, with some fender trimming you can eliminate 90% of the rubbing with the 35s.
wraenking
1/2 ton status
heres mine with pro comp 4" springs and 35's
sorry about the big pic. dont have time to make it small now. i had to do some trimming with the 35's. if i was turning and hit a bump at the same time, it was brutal
sorry about the big pic. dont have time to make it small now. i had to do some trimming with the 35's. if i was turning and hit a bump at the same time, it was brutal
I don't plan on wheelin, just beach driving and almost no offroading.
I want the best look for my truck. thanks again,
are 2 more that I have, You can see on the sreet it don't sit that high>
I know my bike has nothing to do with the thread, but i only have 2 now
of other angle of the truck height, I will take more pic's when I get a chance.
I want the best look for my truck. thanks again,
are 2 more that I have, You can see on the sreet it don't sit that high>
I know my bike has nothing to do with the thread, but i only have 2 now
of other angle of the truck height, I will take more pic's when I get a chance.
wraenking
1/2 ton status
just click on the link in my sig and you can see all my pics
Here's my '85 K30 riding on 4" Skyjacker front and rear springs and 35" Trail Cutters.
Can someone tell me the image tags to get these pics up?
What am I doing wrong?
I FRICKIN' GIVE UP!!!
Can someone tell me the image tags to get these pics up?
What am I doing wrong?
I FRICKIN' GIVE UP!!!
Last edited:
thatK30guy said:Here's my '85 K30 riding on 4" Skyjacker front and rear springs and 35" Trail Cutters.
http://image03.webshots.com/3/1/7/49/17810749aOyfjjOLNp_ph.jpg
http://image03.webshots.com/3/1/8/40/17810840zdBDWfKyXu_ph.jpg
http://image03.webshots.com/3/1/9/34/17810934vDjrURVKhS_ph.jpg
Can someone tell me the image tags to get these pics up?
Sez i'm forbidden, and don't have acces to look at them
Try again......
if you run 8" rims w/ 4.25 backspacing and dont do any wheeling you should be able to fit 35's under a 4" lift without cutting the fenders. i think 6" makes the 35's seem small. heres mine 35's w/ 3" lift on 8" wheels. fenders trimmed for wheeling. sorry the pic is a monster, dont have a picture editing program on this computer.
thatK30guy said:Here's my '85 K30 riding on 4" Skyjacker front and rear springs and 35" Trail Cutters.
Can someone tell me the image tags to get these pics up?
What am I doing wrong?
The image tags look like this
79chevyk10
1/2 ton status
4" front springs, shackle flip with 56's
some trimming with 36 sx's
some trimming with 36 sx's
WEBSHOTS SUCKS DONKEY BALLS!!! 
shane74
1/2 ton status
Go 6" if you are not going to do a rear spring swap or anything like that. You will regret NOT doing it. Another alternative is to go with a 4" lift spring (softer ride/more flex than a 6"), install a 1" zero rate and extended shackles. That will net you 5.5" of lift in the front. that should be plenty to clear 35's w/ moderate wheeling. Also, to help clear them w/out rubbing, consider running a 8" wheel verses a 10" wheel. It makes a HUGE difference on how it stuffs up in the wheel well.
