blazin_blazer
1/2 ton status
had a set of sbc sb2 or sb2.2 heads? i think i want to find me a set & intake...any leads or advice?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
anyone here ever
- Thread starter blazin_blazer
- Start date
blazin_blazer
1/2 ton status
i saw that...and have seen other intakes, but haven't ever seen a set of heads for sale..
btw, before someone chimes in, i want these for my rodded 68 c-10, not my 4x, as from what i understand they are for higher rpms
when they 1st came out, i read that the heads were for nascar teams to use production shortblocks and bolt these heads on and bump compression to 15:1, to use the fact that production shortblocks would stand up to the abuse as a selling point
so i would use dished pistons to get about 11.5/12:1 compression for the strip, i believe these were the 1st mirror port heads gm ever made.
4x4high...i know you know your stuff, in your opinion, what heads would be close to the sb2 equals and good for a hi-rpm strip motor?
btw, before someone chimes in, i want these for my rodded 68 c-10, not my 4x, as from what i understand they are for higher rpms
when they 1st came out, i read that the heads were for nascar teams to use production shortblocks and bolt these heads on and bump compression to 15:1, to use the fact that production shortblocks would stand up to the abuse as a selling point
so i would use dished pistons to get about 11.5/12:1 compression for the strip, i believe these were the 1st mirror port heads gm ever made.
4x4high...i know you know your stuff, in your opinion, what heads would be close to the sb2 equals and good for a hi-rpm strip motor?
