anyone with H2 wheels ???? I searched

[Redfrog]

I did a search came up with nothing I am going 3/4 ton on my blazer, disc brakes on the rear, new rotors all the way around, I can't find locally metric lug bolts to use the lug nuts that came with the wheels so where do you get standard lug nuts that match up with the cone on the metric ones?

 

[GMCJason]

Here's some good info on that very topic:

http://coloradok5.com/forums/showthread.php?t=174287

I just bought 32 for a '99 Dodge 2500 which seem to work great. I haven't run them yet since the truck is still in process. Here's a link to what I bought:

http://www.partsamerica.com/ProductDetail.aspx?MfrCode=DOR&MfrPartNumber=611162&PartType=181&PTSet=A

 

[DEMON44]

I used the stock lug nuts on my '98 dodge when i put the H2 on it. no problems to report in lots of high horse power miles.

 

[Moody]

http://cgi.ebay.com/ebaymotors/GM-C...27|39:1|65:12|240:1318&_trksid=p4506.c0.m245a

Here ya go......I would suggest if you're not going to use the truck center caps to go with the regular 9/16" lug nuts, they are much beefier. Older trucks have the 9/16" wheel studs and the newer trucks the metric size. These dual thread are aluminum and strip easily so be careful

 

[b454rat]

You can use standard lugnuts as long as they are tapered. All factory stuff is and most aftermarket....

 

[Redfrog]

Thanks guys I just ordered the 611162 lugs they should be here soon and maybe I can finih this little project.... Thanks again for the info

 

[sweetk30]

look-at-my-sig-pic-!

sorry-space-bar-broken-at-work-so-you-get-dashes-for-spaces.