CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Axel ratio help!!!
- Thread starter Dabbas
- Start date
Well, if you are going to use the four wheel drive, you will have to get the same ratio as is in the front already unless you are going to change the ratio there too.
But, generally, you would want to start with something with a 4 in it.
4.11, something like that.
If you do a lot of rock climbing, with those size tires, then maybe a 5.
But, generally, you would want to start with something with a 4 in it.
4.11, something like that.
If you do a lot of rock climbing, with those size tires, then maybe a 5.
With a 37" tire I wouldn't go with anything less than 4.56 BUT that also depends on how fast you like to drive down the hiway and what trans you're running.
British Slave
1/2 ton status
- Joined
- Jul 25, 2007
- Posts
- 2,086
- Reaction score
- 2
Lower the number, the faster you go, higher the number, the slower you go.
There, fixed it for you.
63chevyll
1/2 ton status
I think with your 37s go with a 488 or a 513.
But that's all I can say with the info you have given
But that's all I can say with the info you have given
The Pumpkinator
1/2 ton status
They can, but it will feel as if your dragging a house behind your truck when you accelerate from a stoplight
I bought dana 60 front 41-9 and rear axle gm 10.5! I think now it would be better!!
As long as both axles are 41-9 you should be good. 41 is the teeth on the ring and 9 is the teeth on the pinion. Divide the ring (41) by the pinion (9) and you have 4.56s. Should be good for you.
