chevyhd24
Registered Member
i got a lead on a gm drw dana 60 with 4:11 gears its not in the best of shape need a good cleaing and rebuild. just looking to see what this may be worth and if hes asking too much for it. thnanks
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
axle question
- Thread starter chevyhd24
- Start date
Your talking the front correct. Cleaning wont be hard. DRW, Will you run this or change to SRW. I paid $500 for my Dana 60F. What is he asking? If it pretty bad, maybe a couple hundred.
that axle here will sell for $500 in a day. $700 if he sits on it.
About the same for my area too (for a DRW axle).
You might consider posting this in your regional forum to find local value.
chevyhd24
Registered Member
yes the front. i dont know much else about it othe then its spins ok buy hand and has beenstiiting in the dirt rain snow and whatever els behind a barn for close to 5 years now.
few simple things.
if rotors are trashed from major rust thay are around 70-80 new each.
if calipers are frozen most likly 29-39 each remaned from store.
u-joints prob bad thats 70-80 for 2 good spicers.
and pull the cover and look inside. lots of the time from sitting like that and on a farm it might be rusted / broken inside.
and hope the pass side spring plate is there . if not 50-60 for used or aftermarket.
and to convort to srw from drw thats 400-500 for 2 new hub/rotor units.
if rotors are trashed from major rust thay are around 70-80 new each.
if calipers are frozen most likly 29-39 each remaned from store.
u-joints prob bad thats 70-80 for 2 good spicers.
and pull the cover and look inside. lots of the time from sitting like that and on a farm it might be rusted / broken inside.
and hope the pass side spring plate is there . if not 50-60 for used or aftermarket.
and to convort to srw from drw thats 400-500 for 2 new hub/rotor units.
