Are they the same on a 14BSF and a 14BFF? Need to get some U-bolts and spring plates to get my swap in gear....
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Axle tube diameter...
- Thread starter swettysblazer
- Start date
Can't remember what the SF is, but the FF is 3 3/8".
When I swapped from an sf to a ff, I used the same u bolts off the s.f. Also I thought they were 3.5", not that it's far off from 3 3/8" 
Also go for the spring the plates that go on top of the spring instead of under the axle, if you didn't already know
Also go for the spring the plates that go on top of the spring instead of under the axle, if you didn't already know
When I swapped from an sf to a ff, I used the same u bolts off the s.f. Also I thought they were 3.5", not that it's far off from 3 3/8"
Also go for the spring the plates that go on top of the spring instead of under the axle, if you didn't already know
Yessir, I'm gonna get a set from Kert. Thanks fellers
