What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

axles, springs, drive shafts , tires , 4 sale in CT

P

pornorob

1/2 ton status
Joined
Jul 12, 2001
Posts
215
Reaction score
0
Location
;jkl;
I have for sale:

D60 rear w/ 4.56 gears , detroit , dyna trac axles complete drum to drum $500

D44 front w/ 4.56 gears , 8 lug , complete rotor to rotor, need shafts replaced, I have a stock set that go with the axle. pending sale

6" lift springs front and rear from an 86 k5, these are still attached to the axles listed above.

If you want both axles I'll throw in the springs for nothing if you want just the springs I'm asking $150 for the set

I also have custom drive shafts that were set up to be used on my 86 k5 with a 6" lift, sm465, np 208 and the axles listed above. $150 for the front the rear drive shaft is SOLD

I have a set of 16.5" rims that are in good shape 2 have 35" swampers and 2 have 35" BFG MT's $150 for the pair of swampers and $100 for the BFG's.

also for sale

HEI distributor + brand new wires $60
almost new 94 amp alt $40
nice aluminum radiator $130

all of this stuff is off of this truck click here for some pictures

All prices are OBO, all trades considered , no shipping on the axles or tires , will not seperate the tires and rims, Shipping costs are not included in the prices. Thanx for looking let me know if you want pictures of anything specific.
 
Last edited:
do you still have the center console and the windshield visor from the pics? i would take those axles off of your hands but im in NC right now!!
thanks
pat
 
If you want to part out that d44 i need some backing plates and hubs
 
That D60 rear, is it a 30 spline or 35 spline? What springs are they? I am interested in both axles.
 
Patt107- shipping should be about $20 , no the driveshaft does not have a CV , and I don't have the console or visor anymore.

Hidesertwheelin- shipping should be about $40 and I'll try to get the length for you tonight.

Kunit- I actually don't know how many spline the axles are and I can't remember the name of the spring manufacturer :doah:
 
How are the bushings on the lift springs? How old are the springs? Will you throw in the u-bolts and nuts? And where in Manchester are you?
 
Last edited:
orangeGMC- The bushings are in really good shape, I was surprised I didn't have to use a hammer once to get the bolts out. as for how old the springs are I have no idea they were installed by the PO. Oh yeah and I live in the mills apartments off hartford rd.

Patt107- never had any vibrations at any speed with it. I'll work on getting pics ...I found the camera....now where's that damn cable :doah:
 
Would you be willing to let the springs go for $100? And I will come pick them up today. I live right near you.
 
if u part the d44, put me behind k5freak44 for the 8lug hubs, rotors, and backing plates.
 
You must log in or register to reply here.

Latest Posts

Top Bottom