BB 18 Classifieds

[Jason4x4]

didn't see one, so here is one.

I got the dual cup holder in the mail today, Black, goes in place of the ash tray. My shifter hits it, so it is good for an Automatic.

Literally Brand New,
https://www.ecklerstrucks.com/chevy-truck-cup-holder-1973-1987.html

$40, and I'll see if Reddog can bring it to the bash.

 

[Justin V]

I have a 10 bolt coming for @Truckman4life if he still wants it.

I have a 4.10 gear set with carrier and pinion housing available. (14BFF)

A couple stock 14 bolt FF covers, and a stock 60 cover.

An Edelbrock Performer spreadbore intake SBC.

 

[Bent77]

I have a BBC TBI spacer for @Sasquatch

He promised me homemade cookies

 

[72gmck5]

I have an OE full vert roll bar, came out of a 74’ but fits 69’-75’ K5 if anyone is interested.

 

[TuckerK5]

I have an OE full vert roll bar, came out of a 74’ but fits 69’-75’ K5 if anyone is interested.

I’m interested. I’ll be at B.B.

 

[Truckman4life]

I have a 10 bolt coming for @Truckman4life if he still wants it.

I have a 4.10 gear set with carrier and pinion housing available. (14BFF)

A couple stock 14 bolt FF covers, and a stock 60 cover.

An Edelbrock Performer speadbore intake SBC.

Yeah after looking at the current state of my fundage and trying to start building a house, I am most likely not going to make it to BB18 unfortunately. I'm gonna have to bail on that 10 bolt. Sorry.

 

[beags86]

Yeah after looking at the current state of my fundage and trying to start building a house, I am most likely not going to make it to BB18 unfortunately. I'm gonna have to bail on that 10 bolt. Sorry.

Bailing on any 10 bolt is always a good idea.

 

[Truckman4life]

Bailing on any 10 bolt is always a good idea.

Hey now I'm pretty sure my 6.2 and 700r4 will NEVER break it. Although I did get a Snapchat from my buddy this weekend of his '78 K20 with a pretty built 496 sitting there running and now I have big block envy!

 

[beags86]

Hey now I'm pretty sure my 6.2 and 700r4 will NEVER break it. Although I did get a Snapchat from my buddy this weekend of his '78 K20 with a pretty built 496 sitting there running and now I have big block envy!

For sure! Between the broken cranks and lost forward gears you should be golden!

 

[ktmoutfront]

Bailing on any 10 bolt is always a good idea.

Been beating on one for 12 years. Actually, this bent one for 6 years. Swapped the first one because it bent. 7000 pound truck and gravity is not a 10 bolts friend. But the hard parts have held up.

 

[ktmoutfront]

Dual battery box for left side. From a mid 70's Blazer. No rust or rot.

 

[6872xtc]

I have lots of TBI parts,
Harness and ECM from the old '72
wooden and aluminum throttle body spacers
TBI unit
Other associated parts

A 2wd steering box , ported for assist ram, inverted flare style.
Plus other things..

 

[ktmoutfront]

Dual battery box for left side. From a mid 70's Blazer. No rust or rot.

Sold

 

[4door99]

Bringing Dana 60 stub shafts and the short side shaft for Chevy, stock shafts and stock splines. Stub shafts won’t fit my Ford D60. PM me if interested.

 

[Chevman88]

I've got a pass drop 27 spline np241c w/cable speedo output if anyone is interested.

 

[Fastereddie]

I've got a pass drop 27 spline np241c w/cable speedo output if anyone is interested.

What would you want for it?

 

[Chevman88]

I've received a bunch of questions on the 241, so here's some pics. From what I've found these are going for $250 on here. Shoot me a pm if interested.

 

[Bent77]

Anyone need a 4wd TH350 in builder condition?

 

[Bent77]

32 spline SM465

 

[skunked]

Anyone need a 4wd TH350 in builder condition?

Just make sure you bring a spare dump truck box with you this time. KTHANXBYE