Russ
1/2 ton status
ProFlo4 for BBC. Purchased from Folkenheath about 3 years ago and never used. Has his volcano insert mod and he ported the manifold to match gm or edelbrock large oval port heads. Asking $1500. Local pickup in Piedmont AL.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Sold BBC ProFlo4
- Thread starter Russ
- Start date
Damn it John - don’t screw around with us!
F.I. and a larger wiggle-stick is what your Blazer wants/needs - make this happen!
Of course it couldn’t hurt to go with a DART block ( I’m think’n a 540 ) and heads to compliment the cam and injection.
And while you’re at it call up ORD and get a full coil over and multi link suspension setup.
And to round it all out get some 300M rear axle shafts and some RCV fronts.
If ya need assistance in begging and pleading just let me know; I’m only an hour away.
P.S. ask for an additional 10K for a sweet paint job too!
Anything more would just be pushing it…
Last edited:
I got in first. Just did not post it here.
@Russ told me you were first in line for it, since you hadn’t posted I was hoping you might have been bit by the LS bug before it was a done deal.
Big block going into the Jimmy drag truck.
The FI small blocks are cool and everything, but, "there is no replacement for displacement".
The FI small blocks are cool and everything, but, "there is no replacement for displacement".
