JIMMY76
1/2 ton status
I am looking for a BBC bare block to long block running or not as long as it is in good usable or rebuildable condition thanks close to shreveport,la would be a plus Thanks
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
bbc
- Thread starter JIMMY76
- Start date
I have a runner for $800.
JIMMY76
1/2 ton status
I am in Guam right now I should be home in a couplle weeks atleast that is what I am being told I will see what options I have when I get home and go from there Thanks
how many miles or hours on it and what all comes with it and will I beable to see it run? Thanks
how many miles or hours on it and what all comes with it and will I beable to see it run? Thanks
Well, I'm in central Kansas just so you know. The motor runs but could use a carb rebuild and timing adjusted. You would get everything on the motor. Only thing it does not have is A/C.
Don't know how many miles on it but the PO did say it was rebuilt. I think he said somewhere around 20K ago. It does have brand new plugs, wires, cap and rotor on it now as I did those.
If you were to come here, you can listen to it and watch it. If you like it, we can simply remove the nuts and bolts and pull it out quickly as there won't be a front clip on it. I have access to a skidloader to pick it up.
Don't know how many miles on it but the PO did say it was rebuilt. I think he said somewhere around 20K ago. It does have brand new plugs, wires, cap and rotor on it now as I did those.
If you were to come here, you can listen to it and watch it. If you like it, we can simply remove the nuts and bolts and pull it out quickly as there won't be a front clip on it. I have access to a skidloader to pick it up.
I pulled a GM goodwrench motor out of a 7500 series chevy topkick. Its got a busted lifter and all the bearings look good. $400 its a long block.
JIMMY76
1/2 ton status
could you guys please post the size thanks alot like I said I will be home either later sept or early oct. Thanks
JIMMY76
1/2 ton status
iwaxmyjimmy said:
Where is winterville?
10 mins from greenville, nc Home of East Carolina University. the motor is in wilson at the dealership i work at.
steve_kibbe
1/2 ton status
I have a 454 thats been bored .030 over, still at the machine shop, been cleaned and checked for cracks, its all good. I have the stock crank, rods pistons and all if you're interested. I'm wiling to meet half way from 29307(Spartanburg, SC)
steve_kibbe
1/2 ton status
I also have a set of headers I need to get rid of.
$150
$150
JIMMY76
1/2 ton status
steve_kibbe said:I also have a set of headers I need to get rid of.
$150
If i do end up gettin a motor when I get back I will probably get them headers from ya thanks
bayou blazer
1/2 ton status
If you are interested in a complete 454, I have a friend that just put one together and is looking for a new home. I am in the Baton Rouge area so shipping is not an issue. Let me know if you are interested and I can get all the specs and price for you.
JIMMY76
1/2 ton status
I am interested let me know the info please.
bayou blazer
1/2 ton status
PM on the way
