Will they make a 2.5" rear spring for my 90jimmy? Was looking on there website they only make a 2.5 front not rear. Figured there strictly off the shelf or do custom make springs. Trying to achieve 6" with a 4" shackle flip. Want to do 2.5 to balance with the front d60. Thanks.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
BDS?
- Thread starter digity
- Start date
They don't make 2.5 rear springs.
I don't think any of the regular lift retailers will make custom springs. ORD is set up with a company that will make custom springs. Beware, custom stuff is real pricey.
2" spring and a cut off overload from old leaf packs to make a thinner zero rate to bolt to pack get you a 2.5-2.7 spring pack .
or buy the time you add in a set of REAL angle shims like diy4x sells this might get you there also . if you need to shim the rear to correct pinion angle.
or buy the time you add in a set of REAL angle shims like diy4x sells this might get you there also . if you need to shim the rear to correct pinion angle.
Those both sound like simple good solutions. Thanks.
